You are here: Home > Measure trampoline mats
How to Measure for a Round Replacement Trampoline Mat

Here are instructions on how to measure for a round replacement trampoline mat. If you are confused please call us at 800-753-5378 and we will be happy to walk you through this over the phone.

Step 1; Take 4 individual measurements from a spring hole on one side of the trampoline frame to the spring hole on the opposite side of the trampoline frame. (This works best if you have two people measuring). You will be measuring straight across the frame. Once you take your first measurement simply count 5 springs holes to your right and your helper will count 5 spring holes to their right and then you will have your 2nd measurement, continue until you have a total of 4 measurements. Please note measurements in inches.

Step 2; Count the total spring holes in your trampoline frame. Some frames will have 88, 96, 100, 104 etc.

Step 3; Measure the length of 2 or 3 trampoline springs. These need to be measured in a relaxed state, not stretched out in any way, while off the trampoline frame. Be sure to include the hook at each end of the spring when you measure. Some springs will measure 7 inches or 8.5 inches.
What is your first spring hole to spring hole measurement?
What is your second spring hole to spring hole measurement?
What is your third spring hole to spring hole measurement?
What is your fourth spring hole to spring hole measurement?
What is the total number of spring holes in your frame?
What is the total length of spring?

How to Measure for a Round Replacement Safety Pad

Here are instructions on how to measure for a round replacement safety pad. If you are confused please call us at 800-753-5378 and we will be happy to walk you through this over the phone.

Step 1; Measure the outside diameter of your trampoline frame. It works best to think of your frame as a clock. Measure from the outside at 12 directly across the frame to the outside at 6, then repeat this from 3 to 9.
What is the measurement from 12 to 6?
What is the measurement from 3 to 9?

How to Measure for a Rectangle Replacement Trampoline Mat

Here are instructions on how to measure for a rectangle replacement trampoline mat. If you are confused please call us at 800-753-5378 and we will be happy to walk you through this over the phone.

Step 1; Take an inside measurement, at the point where the spring attaches, of the long side of the frame and the short side of the frame. (Some frames will have holes for the spring to attach and some will have a welded piece of metal for the spring to attach).

Step 2; Count the number of spring holes on one long side and one short side of your frame. (If you have metal bars instead of holes then count the amount of bars).

Step 3; Measure the length of 2 or 3 trampoline springs. These need to be measured in a relaxed state, not stretched out in any way, while off the trampoline frame. Be sure to include the hook at each end of the spring when you measure. Some springs will measure 8 inches, 8.5 inches or 9 inches.
What is the long side measurement?
What is the short side measurement?
What is the amount of spring holes on the long side of the frame?
What is the amount of spring holes on the short side of the frame?
What is the total length of spring?

How to Measure for a Rectangle Replacement Safety Pad

Here are instructions on how to measure for a rectangle replacement safety pad. If you are confused please call us at 800-753-5378 and we will be happy to walk you through this over the phone.

Step 1; Measure the outside diameter of your frame, first the long side and then the short side.
What is the long side measurement?
What is the short side measurement?

How to Measure for a Rectangle Replacement Trampoline Mat

Here are instructions on how to measure for an octagon replacement trampoline mat. If you are confused please call us at 800-753-5378 and we will be happy to walk you through this over the phone.

Step 1; Take 4 individual measurements from a spring hole on one side of the trampoline frame to the spring hole on the opposite side of the trampoline frame. (This works best if you have two people measuring). You will be measuring straight across the frame, from flat side to flat side. Once you take your first measurement simply move to the flat side to your right and your helper will move to the flat side to their right and then you will have your 2nd measurement, continue until you have a total of 4 measurements. (Be sure that you and your helper are straight across from each other when measuring). Please note measurements in inches.

Step 2; Count the number of spring holes on one flat side. If you have a spring hole directly in the center of each corner, do not count it at this time. (For example some octagon trampolines will have 10 holes per flat side with one hole in each corner. You will need to list this as 10 holes).

Step 3; Check to see if you have a spring hole in the corner.

Step 4; Measure the length of 2 or 3 trampoline springs. These need to be measured in a relaxed state, not stretched out in any way, while off the trampoline frame. Be sure to include the hook at each end of the spring when you measure. Some springs will measure 8 inches, 8.5 inches or 9 inches.
What is the first flat side to flat side spring hole measurement?
What is the second flat side to flat side spring hole measurement?
What is the third flat side to flat side spring hole measurement?
What is the fourth flat side to flat side spring hole measurement?
Does your frame have a spring hole in each corner?
What is the total length of spring?

How to Measure for a Octagon Replacement Safety Pad

Here are instructions on how to measure for an octagon replacement safety pad. If you are confused please call us at 800-753-5378 and we will be happy to walk you through this over the phone.

Step 1; Measure the outside diameter of the frame from one corner to the corner on the opposite side. Please take this measurement twice, from two different corners.

Step 2; Next measure from the outside frame from flat side to flat side. Please take this measurement twice, from two different flat sides.
What is the first corner to corner measurement?
What is the second corner to corner measurement?
What is the first flat side to flat side measurement?
What is the second flat side to flat side measurement?

How to Measure for a Rectangle Replacement Safety Pad

Here are instructions on how to measure for a rectangle replacement safety pad. If you are confused please call us at 800-753-5378 and we will be happy to walk you through this over the phone.

Step 1; Measure the outside diameter of your frame on one long side. Next measure the outside diameter of your frame on one short side. It is common to have a measurement which is unusual; if this happen please call.
What is the long side measurement?
What is the short side measurement?